Corporate HQ: 7255 East 46th Street, Tulsa, OK 74145
Sales office: 2201 Crown Point Executive Dr., Suite A, Charlotte, NC 28227
|
|
toll-free: 1-866-650-1937 ph: 704-846-2004 fax: 704-847-0522 email: sales@ecompressedair.com Corporate HQ: 7255 East 46th Street, Tulsa, OK 74145 Sales office: 2201 Crown Point Executive Dr., Suite A, Charlotte, NC 28227 |
Del-Monox DM Series Breathing Air SystemsDeltech is updating the DM Series. Call for prices or consider the Hankison Catalite system.
How DM Breathing Air Systems WorkSizing a Deltech DM Breathing Air System Specifications Product Specifications and Pricing Delmonox Replacement Filter Elements for all models DM Series Models 125 to 920 SCFM Del-Monox DM Series compressed air purifiers can be used on a continuous duty basis in high-capacity applications. DM Series purifiers feature a simple design with few moving parts. Standard features include...
How DM Series Breathing Air Systems WorkInlet air enters a multistage high-efficiency prefilter E where liquid oil and water, as well as particulate contaminants, are removed. Electronic drain valves D automatically discharge the separated contaminants.
Filtered air enters one of the two
desiccant towers via a shuttle valve
G. The twin desiccant vessels remove
water vapor. A small portion of the
dried air (purge air) is used to
regenerate the offstream vessel.
Color change indicators I indicate
relative humidity and monitor dryer
performance.
A catalyst/charcoal vessel C converts carbon monoxide to carbon dioxide and removes odor and taste causing hydrocarbon vapors. An afterfilter F removes desiccant dust and other fine particles. A carbon monoxide monitor M measures the level of carbon monoxide in the outlet air and provides an alarm if that level exceeds a predetermined set point. Finally, Grade D breathing air is supplied to the system. Sizing ExampleTo select a DM Series purifier, first determine the air pressure at the purifier inlet and the maximum breathing air flow required at a given time. Size the purifier according to the following example.In a shipyard, 50 workers require 6 scfm each for the Type CE respirators and 13 workers require 25 scfm each for their full-suit air line respirators. The air system pressure is 100 psig. The maximum required breathing air flow rate is (50 x 6) + (13 x 25) or 625 scfm. From the Model Selection Chart, using 100 psig operating pressure as a guide, select a purifier with an outlet flow that equals or exceeds 625 scfm. Select model DM640. Additional air must be supplied to the purifier inlet for operation of the dryer. To estimate the required inlet air flow, divide the required outlet air flow by 0.83. In this example the required inlet flow is 753 scfm. To estimate the required inlet air flow for inlet pressures other than 100 psig.
aBased on saturated 100° F ambient air. Capacity will be reduced with saturated inlet air at higher temperatures; consult Deltech. Maximum recommended inlet air temperature, 120° F; minimum, 65° F. Maximum operating pressure, 135 psig; for operating pressures below 80 psig. Specifications
Product Specifications and PricingClick on a model number for pricing and detailed specifcations.Deltech Model DM125 (125 SCFM) Deltech Model DM170 (170 SCFM) Deltech Model DM260 (260 SCFM) Deltech Model DM300 (300 SCFM) Deltech Model DM400 (400 SCFM) Deltech Model DM640 (640 SCFM) Deltech Model DM920 (920 SCFM) |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Returns | Products | Site Map | Links | Library | Line Card | Trademark & Copyright Notice | Industrial Distribution Resources |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
