Corporate HQ: 7255 East 46th Street, Tulsa, OK 74145
Sales office: 2201 Crown Point Executive Dr., Suite A, Charlotte, NC 28227
|
|
toll-free: 1-866-650-1937 ph: 704-846-2004 fax: 704-847-0522 email: sales@ecompressedair.com Corporate HQ: 7255 East 46th Street, Tulsa, OK 74145 Sales office: 2201 Crown Point Executive Dr., Suite A, Charlotte, NC 28227 |
Desiccant silica gel beads are 97% silica and 3% alumina. Silica desiccant can effectively satisfy most desiccant air dryer applications, particularly the dehydration of compressed air and natural gas. The desiccant silica gel bead shape, uniform particle size and
high bulk density combine to ensure optimum air/gas flow without nesting or channeling. Minimal dusting occurs due to the hard, smooth, spherical shape of the silica desiccant beads. Desiccant silica gel beads are an excellent option for applications requiring long-term economy, higher capacity, premium performance and energy savings.
SGBF35 Silica Gel Desiccant is not affected by water and is therefore generally recommended as a buffer layer. It is far
more resistant to fracturing than other silica gels. The adsorption capacity is slightly lower
than SGA35 Silica Gel Desiccant but certainly high enough to be used as a primary desiccant for a complete bed in severe conditions.
SGBL35 Desiccant Silica Gel is made blue with cobalt chloride as an indicator. The color-change desiccant may be used whenever visual control of moisture is desirable. Color changes from blue to pink when saturating. The
color change does not mean that SGBL35 Silica Gel Desiccant is fully saturated, the desiccant can continue to adsorb
moisture up to 40% of its own weight. Regenerate at 350° F, in a regenerative tower or
in a drying oven for smaller applications.
