ecompressedair toll-free: 1-866-650-1937 ph: 704-846-2004 fax: 704-847-0522 email: sales@ecompressedair.com 
Corporate HQ: 7255 East 46th Street, Tulsa, OK 74145 
Sales office: 2201 Crown Point Executive Dr., Suite A, Charlotte, NC 28227 
Search:       STORE   RFQ   SITE MAP   LIBRARY   CONTACT   LOG IN
Cameron Compression Systems (formerly Cooper & Joy) | ReliaDrain
Cameron Cooper Joy Intake Air Filters | Replacement Cameron Cooper Joy Intercoolers
TurboBlend 46 Compressor Lubricant | TurboBlend Synthetic 32 Equivalent to IR Techtrol Gold

ReliaDrain

Cameron's Zero Air Loss ReliaDrain Drain Valve Your Condensate Drains are Wasting Thousands of Dollars a Year.

Innovative, Cost-Effective, Efficient. Introducing the ReliaDrain electronic level controlled on-demand condensate drain. The ideal solution for draining condensate from your compressed air system with zero air loss. Why Zero air loss is important. A typical TA2000 compressor with a third stage 1/2-inch timer-operated drain valve, operating at 125 psig opening every eight minutes for twenty two seconds, will vent over 3.9 million cubic feet of compressed air per year after draining condensate. At $0.05/kWh, that is nearly $1,440 wasted annually from one single drain valve.

ReliaDrain Features:

  • Zero air loss guaranteed – a constant energy savings
  • Only one moving part which leads to greater reliability and much longer life than mechanical and pneumatic drains
  • Cataphoretic dip coated aluminum corrosion resistant housing
  • Electronically controlled level sensor with integrated alarm function and self-cleaning mode
  • Large reservoir prevents emulsification and clogging
  • Ideal for multi-stage compressors. Works in all phases of operation, even no-load
  • Easy installation (no floor mounting required)
  • Heaters and insulation shells available
Cutaway View of ReliaDrain Empty state:Condensate enters the inlet opening (1) and collects in the pressurized container (2). The diaphragm valve is closed by the pressure of the pilot supply line (3) and the solenoid valve (4) which ensures a tight and leakproof seal of the main valve diaphragm (5). Filled state: When the container (2) has filled with condensate and the capacitive level sensor (6) signals at the maximum level. The solenoid valve is energized and the area above the valve diaphragm is vented. The valve diaphragm opens (7), forcing the condensate into the discharge pipe (8).

Zero Air Loss Will Save You Money

“Leaks can be a significant source of wasted energy in an industrial compressed air system, sometimes wasting 20-30% of a compressor’s output.” - Compressed Air and Gas Institute

Technical Specifications

Available in three sizes to fit the needs of most compressed air systems.

ReliaDrain 2000 (For Flows up to 2,000 SCFM)

ReliaDrain 2000 Dimensional Drawing

ReliaDrain 3000 (For Flows up to 8,000 SCFM)

ReliaDrain 3000 Dimensional Drawing

ReliaDrain 6000 (For Flows up to 50,000 SCFM)

ReliaDrain 6000 Dimensional Drawing
  • ReliaDrain 2000
    • For Flows up to 2,000 SCFM
    • Pressure Range: 12 to 230 PSI
    • Voltages: 110 or 220 VAC
  • ReliaDrain 3000
    • For Flows up to 8,000 SCFM
    • Pressure Range: 12 to 230 PSI
    • Voltages: 110 or 220 VAC
  • ReliaDrain 6000
      • For Flows up to 50,000 SCFM Pressure Range: 18 to 230 PSI
    • Voltages: 110 or 220 VAC

Buy a ReliaDrain
Better Business Bureau Reliability Program Seal
eCompressedair Online Ordering uses Rapid SSL to ensure security
eCompressedair is a Safe Shopping Network Member. Click for Scoring.

 
Home |  Contact Us |  Shipping |  Payment Options |  Privacy |  Credit Application |  Store |  RFQ
Returns |  Products |  Site Map |  Links |  Library |  Line Card |  Trademark & Copyright Notice |  Industrial Distribution Resources